Submitted by: conner54
Enter one of the following console commands on a server to activate
the cheat functions.
List map ID number, name, mode, and number of players - mapList.list
Set path to "_mapList.con" file - mapList.configFile
Reload "_mapList.con" file - mapList.load
Save current map list to "_mapList.con" file - mapList.save
Show total number of maps in current map list - mapList.mapCount
Show the map list ID number of current map - mapList.currentMap
Clear current map list - mapList.clear
Remove specified map from map list - mapList.remove [name]
List players connected - admin.listPlayers
End round and start next map on map list - admin.runNextLevel
View map list ID number for current map - admin.currentLevel
View map list ID number for the next map to be played - admin.nextLevel
Restart current map - admin.restartMap
Ban indicated player by ID; see below for timeout values - admin.banPlayer [id number] [timeout]
Ban indicated player by CD key hash; see below for
timeout values - admin.banPlayerKey [key hash] [timeout]
Ban indicated player by IP address; see below for
timeout values - admin.addAddressToBanList [ip address] [timeout]
Ban CD key hash; see below for timeout value - admin.addKeyToBanList [key hash] [timeout]
Remove indicated IP address from ban list - admin.removeAddressFromBanList [ip address]
Remove indicated CD key hash from ban list - admin.removeKeyFromBanList [key hash]
Clear all ban lists - admin.clearBanList
List banned IP addresses - admin.listBannedAddresses
List banned CD keys - admin.listBannedKeys
Kick indicated player - admin.kickPlayer [ID number]
Use one of the following entries with the banning commands:
Permanent ban - perm
Until next map - round
Number of seconds - [whole number]
Epoch expiration date; seconds since 1/1/1970 - [whole number]
Remote Console Access:
To setup remote console access to the server:
- On the server create a new plain text document in admin called default.cfg
- Enter the following text into the new file:
- Save the file, and start the server.
Now you can access the server remotely by using the following commands from a client:
- rcon login
Use this command to login to the server.
- rcon users
This command lists all the users connected to the server. Very similar to admin.listPlayers
- rcon exec
Replace with a console command you would like to execute on the server.
For example: rcon exec admin.kickPlayer 3
Use a text editor to edit the "unlocks.py" file in the "pythonbf2stats" folder.
Change line 44 from "defaultUnlocks = [0, 0, 0, 0, 0, 0, 0]" to "
defaultUnlocks = [1, 1, 1, 1, 1, 1, 1]".
Faster game loading:
Enter the "\ea games\battlefield 2 demo\mods\bf2\movies" folder and delete or move all
of its files. There will now be no ads or movies at the start of the game. This can also
speed up the menu because there will be no movie in background.
This code can also be done in the demo version of the game.
Submitted by: indra pede
Play BF2 In a Window
To play Battlefield 2 in a window, right click your Battlefield 2 shortcut.
In the Target section, change "+ fullscreen 1" to "+ fullscreen 0" You will
get a windowed version of the game.
tay outside the map border forever!
This glitch allows you to stay outside of the map forever, where you should
normally hear the "Where do you think you are going soldier..." message.
You can do this with a friend for example by making a squad together.
What you do is this: The squadleader goes out into the red zone where you
hear the previously mentioned message and you spawn in on him. You can stay
outside the map forever. Have your friend die and leave the squad so you become
squad leader and let him spawn in on you. Now the two of you can stay outside
and never die from the out of bound penalty.
(Only works on earlier patches)
Use a text editor to edit the "scoringCommon.py" in the folder:
"\ea games\battlefield 2\mods\bf2\python\game\"
In this file you will see score list for different events, which can be changed
as desired. Be careful, as it also works for enemy soldiers.
SCORE_KILL = 50
SCORE_TEAMKILL = 40
The same thing can be done for the "gpm_cq.py" file in the
"ea games\battlefield 2\mods\bf2\python\game\gamemodes" folder.
TAKEOVERTYPE_CAPTURE = 100
TAKEOVERTYPE_NEUTRALIZE = 200
First weapon unlock:
To unlock your first weapon you must gain 1,000 global points on ranked servers.
You will not gain any of the points you have earned in a server unless you play
until the round is over (until the map changes or a team wins). When you have reached
over 1,000 global points in your BFHQ window, quit the game and return for a special
pop up window congratulating you on your new rank and a message stating that you can
now unlock your first weapon. Be very cautious on which one you unlock, as you will
not be able to change it afterwards. The next rank requires 10,000 global points.
Engineers: Getting mines:
Use your wrench to remove enemy and friendly mines to add them to your inventory.
Saving the Medic:
When in a squad, it is very important to have a Medic with you. However when that
Medic dies, all is not lost. Go over to your downed Medic and pick up his kit.
Then, revive him. He will now have your old kit, but at least your squad will still
have a Medic.
Rename your soldier:
To rename your soldier, which the game by default does not allow you to do, you must
edit the file "\Battlefield 2\Profiles\0001\Profile.con" and change the first value,
in the quotes, to whatever you wish your soldier's name to be. For example,
On any map that has the Blackhawk (personnel with two guns) helicopter, form a squad
that can have a medic as the pilot, two support as the gunners (to reload), and two
engineers in the back dropping mines and repairing when the helicopter takes damage.
The helicopter will become an almost invincible flying fortress of death. This is an
easy way to get basic badges (Healing, Resupply, Piloting, Repair, etc.). Also, if
the helicopter is about to explode, you can also bail and parachute for your Airborne
badge. BF2 core tester Redwood Shores.
Karkand roof access:
On a server playing Karkand with Friendly Fire off, play as the Spec Ops kit. Walk
over to the large building overlooking the train accident flag. Place all five of
your C4 charges on the ground about ten feet from the building and run over onto
them. When you are about one foot past the charges, detonate them while still
running. This should give you enough momentum to launch yourself onto the roof. From
the roof, find the slightly raised roof access door and get into a prone position.
You should pass under the slightly elevated ground and be able to fire on the train
accident flag without the enemy being able to see you.
No Reload For the USS Carrier AA Gun:
When playing on a map with the USS Carrier, drop at least one Supply Box near the
USS Carrier AA Gun (Anti-Aircraft). This will give you no reload time for the Stinger.
Note: More than one Supply Box will make the ammunition regenerate faster.
When you have a certain amount of points on the game, keep getting more. When the
end of a round is near, switch to the winning team and your score will be doubled.
Protect your tank:
Spawn as a sniper and find a tank. Lay claymores on each corner of the tank facing out.
Jump in your tank and drive around. If any Special Ops guy tries to lay C4 he'll be
taken out before he even gets to you. Same from enemy vehicles. When the claymores
explode they won't damage your tank either.
In the Allied Intent Extended mod, there is a map called The Push Day. In this map,
follow the left side of the course if you are on the Mec squad side or the right side
if you are the Chinese. You will reach what appears to be an apartment complex. There
will be several balconies. Use your rope to rappel to the third story. When you get
to the end of the rope you will always fall. If you approached this building from the
Mec side it will be the first column of balconies that you need to rappel into. When
you fall, press [Forward]. You will hit the first floor and can parachute inside the
building. You are now impervious to bullets and artillery, while you can still shoot
out and kill people. Do not walk out of the building's frame or you will have to redo
If u hop in the jet on the carrier that points off the edge(not the one that goes
down the runway) then u hold down full power and push mouse forward heaps to pitch
nose down as if u want to drive into the ground. then keep pushing mouse up quickly,
ur front wheel will make u spin around under the platform u were just on upsidedown.
keep pushing mouse and u will spin around on the spot underneath platform till ur the
right way up again and u jet off frum underneath whar u shud have been.
Warning: Dangerous manuver; may result in falling into sea or blowing up, great 4
showing off in multiplayer but practice in single player first cause it sucks to
crash jet in multiplayer.
First git a plane, any plane. then fly near the center of the map and go straight up
(boost helps). Slow down when ur realy high (not to high or ull die)watch ur hight
meter or go on the fly-by view. when u stop just before u fall back hit the eject key
(default 'E') and u will fall, use the mouse to steer urself around in the air, look
around for ur plane and fall near it. dont run into it or ull die, when ur dun flying
around fly over close to ur plane and press 'E' or whatever to get in and fly off.
Dont get carried away tho cus the ground cums up fast and ur engines need time to
start up(they turn off when u hop out). Also when u get low enuf then u start falling
faster than ur plane. Note: If u had a friend who cud do this as well u cud try
switching planes in the air.
In order to make your team practically invincible and have permanent endurance go
to the game folder (C:\Program Files\EA Games\Battlefield 2\mods\bf2\Objects_server.zip
soldiers) and first choose which side that you want to modify; ch for china, eu for
europe, mec for arabs, and us for united states, Etc, remember to keep the folder
open by minimizing it to the taskbar.
First make a backup then cut the file and right click on it and uncheck read only.
Then go to ?_heavy_soldier.tweak and ?_light_soldier.tweak and open them in a text
Then save the file and right click on it and select read only and place it back
In the correct folder. To upgrade weapons, go to C:\Program Files\EA Games\Battlefield
2\mods\bf2 \Objects_server.zip\kits and then again select which side that you want
to modify; ch for china, eu for europe, mec for arabs, and us for united states,
remember to keep the folder open by minimizing it to the taskbar.
First make a backup then cut the file and place it on the desktop and right click on
it and uncheck read only, then open it in a text editor. Change all of the following
files by opening each one:
?_Assault.con, ?_AT.con, ?_Engineer.con, ?_Medic.con, ?Sniper.con, ?, _Specops.con,
and change to:
and do this on all of the above mentioned files which will upgrade their weapons,
then save the file and right click on it and select read only and place it back
into the correct folder. Play the game and try running without losing endurance,
shooting upgraded weapons and taking direct fire without injury, now you are a
How to win Couracant fast:
Submitted by: SamG
Email : firstname.lastname@example.org
Set the hero timer to always. Now load the battle and choose to be the CIS. You should
ge tthe chouce to be Darth moul right away. Once you get him sprint from your starting
CP to the council chamber derectly across from you.once you take it you will then have
the enemy pined down to one CP. You will mostlikly win the battle within 2 minutes.